高速转镜相机中倾斜光束的成象

本文通过建立几何模型 ,讨论了高速转镜相机光束倾斜入口的成象原理。证实了倾斜光束入口在转镜旋转时成象点的扫描轨迹是在以入射点为顶点 ,以成象点和入射点的连线为母线扫出的正圆锥底面的平面内 ,从而把空间光学的复杂设计问题简化成平面上的设计。此原理已用于 PDF- 2 0 0型平面转镜等待式分幅相机的设计     

Fullerene Derivatives Attenuate Bronchoconstriction Induced by Xanthine-Xanthine Oxidase

The intratracheal instillation of xanthine-xanthine oxidase caused a marked decrease in dynamic respiratory compliance, indicating airway constriction. The constriction was significantly attenuated by fullerenol-1, but not by other agents or receptor antagonists.     

Fractal fracture and transformation toughening in CuNiAl single crystal

The fracture toughness J _Ic (ρ) and fractal dimension D _f of fractured surfaces of CuNiAl single crystal have been measured at temperatures in the range 20 °C to 120 °C, in which thermoelastic martensitic transformation takes place. The parent phase has higher fracture toughness than the martensite phase due to stress-induced transformation. The relationship between J _Ic (ρ) and D _f has been studied. It was found that log J _Ic (ρ) is linearly related to D _f if the failure involves a single mechanism. The slope of the plot may either be positive or negative for brittle or ductile failure, respectively. The difference in the J _Ic (ρ)-D _f correlation can be understood in terms of the micromechanism of fracture.     

大跨度架空输水钢管的纵向局部加强设计

本文给出了用加强板加大管道截面系数来增加架空输水管道跨越距离的设计方法及其计算过程,并用实例说明了用此种方法加强大跨度管道的有效性和合理性。     

A new approach to aid urban water management decision making using trade-off sacrifice modelled by fuzzy logic.

An approach to aid decision making for urban water management is presented that is based on the concept of trade-off sacrifice level in pairwise comparisons between criteria, modelled using fuzzy logic. This approach is illustrated by a case study - selection of alternative water supplies for a Sydney household. Four key decision making criteria covering health, economic, environment and technical aspects are selected: annual probability of infection, life cycle energy use, life cycle cost and reliability. The decision making problem is to select between cases with different volume and application of recycled greywater and rainwater in light of the four criteria. Decision maker's preference is expressed by five levels of trade-off sacrifice between pairs of criteria. The decision makers can assign their preferences for sacrifice level by linguistic assessment and the output trade-off weight (TOW). Measures of decision makers' perceived trade-off level are modelled by a rule-based fuzzy logic control system. The final analysis shows the performance for each sacrifice class for each case, to aid overall decision making with stakeholders.     

High-speed Modulation of InGaAs: Sb-GaAs-GaAsP quantum-well vertical-cavity surface-emitting lasers with 1.27-/spl mu/m emission wavelength

1.27-/spl mu/m InGaAs: Sb-GaAs-GaAsP vertical-cavity surface-emitting lasers (VCSELs) were grown by metal-organic chemical vapor deposition and exhibited excellent performance and temperature stability. The threshold current changes from 1.8 to 1.1 mA and the slope efficiency falls less than /spl sim/35% as the temperature raised from room temperature to 70/spl deg/C. With a bias current of only 5 mA, the 3-dB modulation frequency response was measured to be 8.36 GHz, which is appropriate for 10-Gb/s operation. The maximal bandwidth is measured to be 10.7 GHz with modulation current efficiency factor (MCEF) of /spl sim/5.25 GHz/(mA)/sup 1/2/. These VCSELs also demonstrate high-speed modulation up to 10 Gb/s from 25/spl deg/C to 70/spl deg/C.     

2005，十大危险入侵主妇厨房

食品安全．在2005年中仍然纷纷扰扰：食品与家庭每个成员的健康息息相关，而维护全家人的健康，则是女主人义不容辞的责任。我们一起来听听．于她们而言．2005年最关心的食品安全问题是什么？[编者按]     

Accelerating Refractive Rendering of Transparent Objects

In this paper, a technique is proposed for the rendering of transparent objects interactively using the method of refractive rendering. In the proposed technique, the refractive rendering algorithm is performed in two stages, namely the pre‐computation stage and the shading stage. In the pre‐computation stage, ray‐traced information, including directions and positions of rays, are generated by a ray tracing process and are stored in a set of ray lists. In the shading stage, these data are retrieved from the ray lists for computing the shading of an object. Using the proposed technique, photorealistic image of transparent objects and gemstones with various cuttings, material properties, lighting and background can be rendered interactively. By combining the refractive rendering technique with conventional shading techniques, jewelry and crystal designs can be rendered at a much higher speed comparing with conventional ray tracing techniques.     

一种温度不敏感频率范围宽的三角波振荡器

本文介绍了一种由双比较器型施密特触发器构成的三角波振荡器电路,它通过对电容恒流充放电产生对称三角波;此电路的优点是其产生的三角波的频率稳定且具有很高的精度,并对温度和电源的变化不敏感;文章最后给出了电路的Hspice仿真结果。     

Effect of electrolysis superheat degree on anticorrosion performance of 5 Cu/（10NiO-NiFe2O4） cermet inert anode

5Cu/(10NiO-NiFe2O4) cermet inert anodes were prepared by cold-pressing and sintering process, and the effect of superheat degree of melting K3AlF6-Na3AlF6-AlF3 on their anticorrosion performance was studied under electrolysis conditions. The results show that, the fluctuation of cell becomes small with increasing of superheat degree, which is helpful to inhibit the formation of cathodic encrustation; the concentration of impurities from inert anode in bath goes up to certain degree, but it is far smaller than those in traditional high-temperature bath. Increasing the superheat degree of melting K3AlF6-Na3AlF6-AlF3 has unconspicuous effect on the contents of impurities in cathodic aluminum. The total mass fractions of Fe, Ni and Cu in aluminum are 15.38% and 15.09% respectively under superheat degree of 95 and 195 ℃. From micro-topography of anode used view, increasing the superheat degree can aggravate corrosion of metal Cu in inert anode, and has negative influence on electrical conductivity of electrode to some extent.